Find concrete & foundations businesses serving Old%20toronto and surrounding areas. Use our search to compare profiles, see service areas, and request free quotes from trade professionals near you.
Try searching nearby cities, or browse all locations.
Concrete driveway installation in Old%20toronto typically costs $8 to $18 per square foot including forming, rebar, and finishing. A new concrete patio ranges from $6 to $14 per square foot. Foundation work varies significantly based on depth, soil conditions, and scope. Decorative concrete such as stamped or exposed aggregate is priced 20 to 50 percent higher than standard flat work.
Concrete placement in Old%20toronto is best done when temperatures are consistently between 10 and 25 degrees Celsius. Hot summer weather requires special admixtures and curing procedures to prevent cracking. Cold weather pours below 5 degrees Celsius require heated enclosures, insulated blankets, and accelerated admixtures, all of which add cost. Late spring through early fall is the preferred window.
Concrete reaches approximately 70 percent of its design strength in the first seven days and nearly full strength by 28 days. Foot traffic is typically safe after 24 to 48 hours. Light vehicle traffic should be avoided for at least seven days. Heavier loads should wait the full 28-day cure period. Sealing a concrete surface helps protect it from salt and freeze-thaw damage in Old%20toronto's climate.
Most concrete flatwork such as driveways, patios, and walkways does not require a permit in Old%20toronto, though some municipalities have requirements related to stormwater management and impervious surface coverage. Foundation work always requires a permit. Check with your local building department or ask your contractor to confirm before work begins.
Ask about the concrete mix design and specified strength (3000 PSI is standard for residential driveways; 4000 PSI is better for cold climates). Ask about control joint placement to manage cracking, reinforcement (fibre mesh vs. rebar), cure time before use, and whether sealing is included. A detailed written quote with these specifications protects you from disputes after the pour.
